Call 0804861101962% Response Rate
SEND EMAIL
If anengine is used without coolant (antifreeze), it can suffer extended damage especially during winter. In the summer time, cooling can be obtained using plain water in an emergency situation although not recommended much beyond this since it’s much easier to boil over as well, however during the wintertime, water solidifies (freezes) and expands in volume which can crack your engine block, radiator and heater cores. This is the reason coolant is mixed with distilled water in a minimum 50/50 proportion. Coolant lowers the freeze point of the coolantin your radiator to protect it from freezing, even in the worst winter conditions. Coolant in the summer time works as an anti-boil and protects the system components from corrosion, which is a big deal especially with aluminum components.
Coolant (Antifreeze) liquid has the role to help the engine cool in the summer time (it keeps the engine from boiling over) and protects the engine from freezing during winter.
However, besides these well known benefits, there are also others worth mentioning:
Theoretically, coolant (antifreeze) liquid should be good for an indefinite period. This is in theory, however in real world conditions, regardless of it’s quality, coolant (antifreeze) should be changed once every 2-5 years (average time after which it loses much of its benefits, unless specifically formulated as ‘lifetime’ coolant).
One should not forget to change their coolant because in the winter time, the engine can suffer irremediable damage.
Product Details:
| Minimum Order Quantity | 25 Litre |
| Pack Size (Litre) | 210 Kg |
| Packaging Type | Barrel |
| Type Of Coolant | Submarsible Coolant |
| Color | colored liquid material |
| Boiling Temp. (Degree Celsius ) | 105 centigrade |
| PH Value (pH) | 8 Ph |
| Application | Submarsible pump |
Coolant-submersible is a water thin low viscosity; non-combustible and heat transfer coolant .It is a highly efficient coolant for use in all type of submersible pumps. Coolant-submersible is specifically formulated and recommended for all type of submersible pumps, as well as for all general industrial applications. Coolant-submersible also eliminates the hazards of damaging mineral deposit, which are built up internally during the operation. Coolant-submersible lubricates ball bearings, liner, gasket and seal, thus extending time between preventive maintenance. Its Corrosion inhibitors protect iron, steel, aluminum, brass and copper components. The rust inhibitors of the coolant are extended life and can re-inhibitate so its running life is more than others coolant. Coolant-submersible is a non-volatile, non-hazardous and non-toxic product during the storage and operation. Its thermal stability and dielectric properties make a cooling liquid suitable for all submersible pumps.
Coolant-submersible helps in the process in the following manner:-
Coolant-submersible reduces the initial torque and electric consumption of the pump.
It is more efficient in heat transfer to keep the motor cooler than present coolant.
Coolant-submersible t gives more lubricates to the motor parts like seal, ball bearings etc to increase the durability.
Coolant-submersible corrodes less the contact parts of the motor (having the corrosion inhibitor) to increase the life span of motor.
There is no problem of the scale in the cooling line due to its property and scale inhibitor.
Its freezing point is less the water so it can works below the freezing point and there is no problem of keeping the pump out side in winter season.
Application: Coolant-submersible is compatible with all other standard coolants and also with metallic and non-metallic parts of the equipment. The product should be used without any type of the dilution, means it is a ready to use so no care is to be taken before use. It is also completely tested before dispatch.
Coolant-submersible is available in two qualities (1) up to -12 degree centigrade (2) up to -27 degree centigrade product. The suitable product for pump is depend upon the
Recommendation of machine manufacturer.
The manufacturer can also supply the automobile and other type of coolant.
For cleaning of the cooling system always use plazclean of APL.
Additional Information:
Product Details:
| Minimum Order Quantity | 25 Litre |
| Color | Green/Blue |
| Pack Size (Litre) | 5,25, 210 lts plastic drum |
| Type Of Coolant | Aero Engine Coolant |
| Freezing Temp. (Degree Celsius ) | less than 50 |
| Water Content (Percent) | 49-51% |
| PH Value (pH) | 7 -8 |
| Packaging Type | Drum |
| Brand | Advance |
Aero engine coolant or aero plane engine coolant is not only control the temperature of cylinder head Temperatures (CHT) of power plant installation of aero plane, but also keep free from corrosion and scale of the cooling system.
The Aero coolant protects the cylinder heads from over heating by dissipating it. It also saves the engine components and assembly by appropriate additives from freezing. The coolant is a longer life coolant due to its super additives. The product is suitable for all seasons due to its low freezing point. It is a ready to use product so no further addition is required. The aero coolant does not freeze up to -50°C
The specific type water has been added during the process and tested according the same. The product is non flammable due to water contains. Its specific thermal capacity is higher then water less coolant so its gives more efficiency than water less coolant in heat transfer, but its boiling point is less than water less coolant so, this product allows only up to 120°C cylinder head temperature. There is more water loss than water-less coolant due to low boiling point at higher temperature.
The product is not only gives corrosion protection to the Aluminum but also other metals like .steel, brass, copper, solder etc;
The water less coolant can be use on higher temperature due to its high boiling point. The product is amine, phosphate, nitrite free.
The aero coolant is suitable for the all types of water coolant aero engines.
Its use, change of frequency, testing process etc; are as per manufacturer recommendation.
Additional Information:
Product Details:
| Minimum Order Quantity | 25 Litre |
| Packaging Type | Barrel |
| Type Of Coolant | MRI Coolant |
| Color | Green/Blue |
| Packaging Size | In 5,25. & 210 Kg. M.S./HDPE Drum. |
| PH Value (pH) | 7 -8 |
MRI coolant removes the heat from the conductor effectively which developed during the scanning operation. MRI coolant or heat transfer fluid flows through the one hollow conductor structure to maintain patient bore below a maximum desired temperature during operation of the magnetic resonance imaging system. MRI coolant or heat transfer fluid has a very high specific heat and thermal conductivity. The MRI coolant or heat transfer fluid has retained low electrical conductivity through extended periods of use. MRI coolant is composed of a base composition and an additive package which imparts the property of retaining low electrical conductivity for extended periods of time. This coolant is compatible with the various components of the cooling system, MRI coolant or heat transfer fluid does not corrode the cell due to highly effective corrosion inhibitor in it.
MRI coolant is a water thin low viscosity; non-combustible and heat transfer fluid. It is a highly efficient coolant for use in circulation and re-circulation systems. MRI coolant also eliminates the hazards of damaging mineral deposit, which are built up internally during the operation. It lubricates pump, liner, gasket and seal, thus extending time between preventive maintenance. Its corrosion inhibitors protect iron, steel, aluminum, brass and copper components. The rust inhibitors of the coolant are extended life and can re-inhibitate so its running life is more than others coolant. It is a Non-Volatile and Non-Hazardous product during the storage. Its thermal stability and dielectric properties make a cooling liquid suitable for MRI cooling.
It is a non toxic and biodegradable product and compactable with metallic and non metallic parts of the equipment. It is non conductivity of the electricity so, it is a shockproof to the patient during the testing.
Specification:
PRODUCTMRI coolantSpecific Gravity>1pH7.-8Reserve AlkalinityColourGreen/BluePacking :In 5,25. & 210 Kg. M.S./HDPE Drum.
Manufacturing Submersible, Plumbing & summer coolant
Additional Information:
Product Details:
| Minimum Order Quantity | 25 Litre |
| Features | Coolant |
| Material | Liquid |
| Form | LIQUID |
| Performance Level | Extra Ordinary |
| Soluble In | Water |
| Packaging Type | Drum |
| Usage | Industrial |
| Brand | Inported |
| Type of Coolants | Distilled Water |
| Special Qualities | Anti Rust, Anti-Freeze |
Antifreeze Coolant or Radiator Coolant is used by all vehicles for heat transfer. Antifreeze Coolant should be efficient in transferring the heat as well as preventing scale & corrosion of the radiator and the engine cooling system. Antifreeze Coolant is antifreeze during the winter due to low freezing point and an anti boiling during the summer season due to high boiling point.
Antifreeze Coolant or Radiator Coolant helps the engine to give optimum performance. All Antifreeze Coolant is based on Ethylene Glycol. BODAR INDUSTRIES is selling Antifreeze Coolant or Radiator Coolant in the name of APICUL (Conc.) or RADICUL (Ready to use) in its brand. APICUL meets the international JIS- K – 2234 or OEM specification & Supersedes.
Chemical stable & Low Viscosity. Longer Life, less corrosive to the metal parts & less changes.Highly effective in heat transfer.Low Freezing point & High Boiling point.Keep the engine cool & prevent the over heating.Improve the air conditioner output.Less Scale formation & degrading.Enhance fuel performance.
APICUL is a Concentrate Antifreeze Coolant and is available in following types:
APICUL (TR) Conventional: It is a blend of conventional type of scale & corrosion inhibitors giving a high performance to the engine. This is a Phosphate & Amine free so does not precipitated with the hard water and also not effect the environment. APICUL (TR) is an economical Antifreeze Coolant.
APICUL (EL) Extended Life: The type of corrosion inhibitor mixed in this coolant is based upon Carboxylate technology so it gives a longer life & more protection to the internal combustion engine and the frequencies to change the Radiator Coolant is less then others thus became it is more economical. The Coolant is also compatible with hard water.
The above product is available in different colors like Greenish, Blue, Orange, Red, etc.
Antifreeze Coolant or Radiator Coolant concentrate can not be used directly in car as it has a poor heat transfer property, therefore it is always recommend dilute in to water to increase the heat transfer property.
RADICUL is a Ready to use Antifreeze Coolant in a Concentration of 20% to 50% with water & is available in following types:
RADICUL (TR) Conventional: It is a ready to use Coolant diluted with water of a conventional type of Antifreeze Coolant with other additives to increase the life of coolant & engine. This product can be directly used in the cooling system.
RADICUL (EL) Extended Life: It is a ready to use Coolant diluted with water of a extended life coolant with other additives to get optimize performance. This product can be used directly in the cooling system.
The above product is available in different colors like Greenish, Blue, Orange, Red, etc.
Packing : 500 ml, 1Ltr.in HDPE Bottle.
5, 25, 50 & 210 Ltrs. in HDPE Drum.
Special Products:
1. Antifreeze Coolant based on Mono Propylene Glycol (Non Toxic) in Conventional & Extended Life.
2. SCA (supplementary chemical additive): This product is added in conventional type of coolant to increases its life.
3. Concentrate scale and corrosion inhibitor in powder form for Coolant.
Product Details:
| Form | Powder |
| Grade | Technical Grade |
| Packaging Type | Drum |
| Usage/Application | Industrial and Commercial Use |
| CAS Number | 72-17-3 |
| Chemical Formula | NaC3H5O3 |
| Molecular weight | 112.06 g/mol |
| Density | 1.33 g/cm3 |
Additional Information:
Product Details:
| For Radiator Type | Industrial Radiator |
| Liquid Volume (in Litre) | 1 L |
| Coolant Type | Distilled Water |
| pH of the Solution | 8 Ph |
| Special Qualities | Anti-Freeze |
| Packaging Type | Can |
Product Details:
| Minimum Order Quantity | 25 Liter |
| Pack Size (Litre) | 210 Kg |
| Usage/Application | Industrial Use |
| Type | Hvac Duct |
| Brand | KRU-BTAC |
| Packaging Type | Barrel |
| Type Of Coolant | Chiller- Coolant |
| Boiling Temp. (Degree Celsius ) | LESS THAN 105 degree centigrade |
| Freezing Temp. (Degree Celsius ) | 32 Degree C |
| PH Value (pH) | 8.5 TO 9.6 |
HVAC- Chiller- Coolant
HVAC-chiller- coolant is a high efficient heat transfer fluid for the chiller and HVAC system. HVAC-chiller- coolant is not only acts as a carrier of the heat energy but also the protect chillers and their associated cooling systems against corrosion, scale & algae, thus allowing maximum heat transfer. HVAC-chiller- coolant contains multi-Metal Corrosion Inhibitors, thus the life of the chiller extends and also minimizes downtime. HVAC-chiller- coolant does not allow scale and sludge to deposit to form a film easily and keep them in circulation thus getting maximum heat transfer rate & eliminates the Blockages.
HVAC-chiller- coolant is a low viscosity product so reduces the significant energy consumption during the pumping/ circulation. It is a high Thermal conductivity product so getting a better heat transfer rate. It does not solidify at sub zero temperature so eliminates fluid expansion and pipe bursting . HVAC-chiller-coolant has a bitter taste additive to prevent animal consumption. It is a non volatile and non-hazardous during the storage.
Typical Properties :
PRODUCTHVAC- Chiller- CoolantComposition :Mixture of glycol, corrosion inhibitor, anti oxidant, biocides,Appearancecolored liquid materialOdourPeculiarDensity1.07-1.085SolubilityCompletely soluble in water.FoamingNilReserve alkalinity(Min)10Boiling Point:> 105 degree centigradepH8.5 — 9.6Freezing point:
Application :
HVAC-chiller- coolant is compatible with all other standard coolants and also with metallic and non-metallic parts of the equipment. The product should be used without any type of the dilution, means it is a ready to use so no care is to be taken before use. It is also completely tested before dispatch. For toping purpose always use de-ionized water.
HVAC-chiller- coolant can be use in the following applications: -
• HVAC system
• Thermal Energy Storage
• Processing Cooling/Heating
• Line Heaters
• Snow Melting
• Refrigeration Systems
• Plastic Extrusion
The product should not be mix with antifreeze coolant of automotive, tape water, methanol based Coolant, and torch coolant.
The manufacturer can also supply the automobile and torch coolant. for cleaning of the cooling system always use plazclean of APL
Additional Information:
Product Details:
| Minimum Order Quantity | 25 LITRE |
| Packaging Size | In 5,25. & 210 Kg. M.S./HDPE Drum. |
| Packaging Type | Barrel |
| Color | Green/Blue |
| Type Of Coolant | Plumbing |
| Freezing Temp. (Degree Celsius ) | 50 C |
| Water Content (Percent) | 49-51% |
| Application | Plumbing |
| PH Value (pH) | 7 -8 |
Plumbing coolant
Plumbing coolant –antifreeze is a storage type anti freeze coolant so it prevents freeze damage when the temperature drops to extremely low levels.
Plumbing coolant formula protects water systems against bursting down superb. It gives the Corrosion protection for all metals, including aluminum, steel, copper and brass.
Plumbing coolant also gives boil protection equal to Ethylene glycol antifreeze.
Plumbing coolant is a full strength permanent engine antifreeze based on Propylene Glycol/Ethyl Alcohol.
Plumbing coolant is a non- toxic, non- staining and environmentally safe product .
Plumbing coolant is a premium antifreeze and heat transfer fluid. It is a premixed- ready to use-for easy application, it also provides flow protection up to60°F.
Plumbing coolant is used in boats, potable water systems in RVs, seasonal homes, to drains and fresh water lines in septic systems, swimming pool’s filtration and heating systems, vacation homes and raw water cooled marine engines
Plumbing coolant can be use in potable and non-potable water systems to protect the lines, pipes, equipment, etc
Plumbing coolant can be recycle, reuse if the product drain and storage properly after testing and treating it Advance petrochemical ltd provides the helps In this process.
This product is available in two types (1) up to -50 degree centigrade (2) up to -100 degree centigrade. Use of the particular product depends upon local weather condition.
Specification: -
Specificl.110—1.116pH7.-8Reserve Alkalinity>20Water49-51%Freeze point>-50 ºCColourGreen/BluePacking5, 25, 210 lts drum
Additional Information:
Product Details:
| Minimum Order Quantity | 25 Litre |
| Color | colored liquid material |
| Packaging Type | Drum |
| Features | Complex Agent, Extreme Pressure, Inhibitors, Base Oil, Additive |
| Product Type | Coolant |
| Density (kg per L) | 1.018-1.043 |
| Boiling Point (Deg. Celsius) | less then 105 degree centigrade |
| Packaging Size | In 5,25. & 210 Kg. M.S./HDPE Drum. |
| Type Of Coolant | plasma Torch |
| pH value | 6.5-8.00 |
| Physical State | Liquid |
| Type Of Coolants | Torch Coolant |
| Usage | Commercial |
Plasma –torch coolant is a water thin low viscosity; non-combustible and heat transfer torch coolant Plasma coolant is a highly efficient welder coolant for use in all welder torch radiator circulation and re-circulation systems. Plasma coolant is specifically formulated and recommended for all Plasma, Mig and Tig resistance welding systems, as well as for all general industrial applications. Plasma-torch coolant also eliminates the hazards of damaging mineral deposit, which are built up internally during the operation. Plasma-torch coolant lubricates pump, liner, gasket and seal, thus extending time between preventive maintenance. Its Corrosion inhibitors protect iron, steel, aluminum, brass and copper components. The rust inhibitors of the coolant are extended life and can re-inhibitate so its running life is more than others coolant. Plasma-torch coolant has a bitter taste additive to prevent animal consumption. Plasma-torch coolant is a Non-Volatile and Non-Hazardous product during the storage. Its thermal stability and dielectric properties make a cooling liquid suitable for plasma arc welding and tungsten inert gas welding system. This coolant is suitable for Hyperthem machine.
Typical Properties :
CompositionMixture of glycol, corrosion inhibitor, anti oxidant, biocides, etcAppearancecolored liquid materialOdorPeculiarDensity1.018-1.043SolubilityCompletely soluble in water.Conductivity<10FoamingnilReserve Alkalinity (max.)10Boiling Point:> 105 degree centigradepH6.5-8.00
Plasma coolant helps in the cutting process in the following manner:-
Improves cut quality and consistencyIncreases cutting speeds and material thickness capabilitiesIncreases consumable lifeThere is no starting trouble of Tourch.Reduces the Electric consumption.
Application: Plasma-torch coolant is compatible with all other standard coolants and also with metallic and non-metallic parts of the equipment. The product should be used without any type of the dilution, means it is a ready to use so no care is to be taken before use. It is also completely tested before dispatch. For toping purpose always use de-ionized water.
The product should not be mix with antifreeze coolant of automotive, tape water, methanol based Coolant, and HVAC coolant.
The plasm-torch coolant is available in two qualities (1) up to -12 degree centigrade (2) up to -27 degree centigrade product. The suitable product for the machine is depend upon the recommendation of machine manufacturer .A biodegradable and non toxic is also avail able with us.
The manufacturer can also supply the automobile and HVAC coolant.
For cleaning of the cooling system always use plazclean of APL.
Packing:5, 25,210 its drum
Additional Information:
Product Details:
| Minimum Order Quantity | 25 litre |
| Features | Base Oil |
| Product Type | Weldcool-Torch coolant |
| Boiling Point (Deg. Celsius) | less then 105 C |
| Foam Sequence | nil |
| pH value | 6.5-8 |
| Usage | Commercial |
Weldcool is a low viscosity; non-toxic, non-combustible heat transfer torch coolant .It is a highly efficient torch coolant for use in all welder torch radiator circulation and re-circulation systems. Weldcool is specifically formulated and recommended for: MIG Welding, TIG Welding, Laser Welding and Laser Cutting, Plasma Welding, Robotic Welding, Resistance and Spot Welding, and many others, as well as for all general industrial applications. Weldcool also eliminates the hazards of damaging mineral deposit, which are built up internally during the operation. and prevents for clogging. It lubricates pump, liner, gasket and seal, thus extending time between preventive maintenance. Its corrosion inhibitors protect iron, steel, aluminum, brass and copper components. The rust inhibitors of the coolant are extended life and can re-inhibitate so its running life is more than others coolant. Weldcool is more environmentally friendly & resists to freezing down. It is a non-volatile and non-hazardous product during the storage. Its thermal stability and dielectric properties make the cooling liquid suitable for high performance welding torches used in the industry. It can be used in both warm and cold weather applications Weldcool does not contain any chlorine, sulphur, nitrates, PCB's, phenols, formaldehyde, or silicone.
Typical Properties:
Appearance -colored liquid materialOdor:PeculiarSolubility:Completely soluble in water.Conductivity:<10Foaming:nilReserve Alkalinity (max.):10Boiling Point:> 105 ºCpH:6.5-8.00
Weldcool helps in the welding process in the following manner:-
Improves welding quality and consistency
Increases welding speeds and reduces the break time.
Increases consumable life (torch, pipe, pumps)
Reduces the electric consumption
Application: Weldcool is compatible with all other standard coolants and also with metallic and non-metallic parts of the equipment. The product should be used without any type of the dilution, means it is a ready to use so no care is to be taken before use. It is also completely tested before dispatch. For toping purpose always use distilled water.
The product should not be mix with antifreeze coolant of automotive, tape water, methanol based Coolant, and HVAC coolant.
A biodegradable and non toxic is also avail able with us.
The manufacturer can also supply the automobile and HVAC coolant.
For cleaning of the cooling system always use plazclean of APL.
Additional Information: